+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6017DDUCM AS2S5: ⌀85 × ⌀130 × 22 mm6017DDUCM AS2S5DDU
Fig. 1: 6017DDUCM AS2S5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6017DDUCM AS2S5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6017DDUCM AS2S5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 19 approximate
d
85 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
22 mm
Width BRing width. Source: supplier data
Seal
DDUcontact seals on both sides
Clearance
CM
01

Equivalents

the same size 85 × 130 × 22 from other brands

20 products
Drawing: 6017DDUCM AS2S5
You are viewingNSK 6017DDUCM AS2S5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 60176017open, no protection, normal clearance, standard designCT85 × 130 × 2231 pcs€5.54Request a quote
  • Photo: 60176017open, no protection, normal clearance, standard designFLT85 × 130 × 22available to order€21.38Request a quote
  • Photo: 6017 NR6017 NRopen, no protection, normal clearance, groove and snap ringSKF85 × 130 × 22available to order€72.68Request a quote
  • Series illustration (not a photo of this item): 60176017open, no protection, normal clearance, standard designGPZ85 × 130 × 22out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 60176017open, no protection, normal clearance, standard designKG85 × 130 × 22available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60176017open, no protection, normal clearance, standard designSKF85 × 130 × 22available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60176017open, no protection, normal clearance, standard designURB85 × 130 × 22out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 6017 ZZ6017 ZZmetal shields on both sides, normal clearance, standard designCT85 × 130 × 22available to order€4.65Request a quote
  • Photo: 6017 ZZ6017 ZZmetal shields on both sides, normal clearance, standard designZ&S85 × 130 × 22available to order€13.01Request a quote
  • Series illustration (not a photo of this item): 6017 ZZ6017 ZZmetal shields on both sides, normal clearance, standard designno brand85 × 130 × 22available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 130d 85B 22
d×D×Bsize 85 × 130 × 22mm

Deep groove ball bearing 6017-2RS, design DDU: contact seals on both sides. Under GOST the same bearing is designated 180117.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180117?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0117 corresponds to the ISO base 6017. Size 85 × 130 × 22 mm, a full equivalent of 6017-2RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet