+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6015ZZCM D EEMS5: ⌀75 × ⌀115 × 20 mm⌀115⌀75206015ZZCM D EEMS5D
Fig. 1: 6015ZZCM D EEMS5, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6015ZZCM D EEMS5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6015ZZCM D EEMS5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 25 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
115 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
20 mm
Width BRing width. Source: supplier data
Seal
Dcontact seal on one side
Clearance
CM
01

Equivalents

the same size 75 × 115 × 20 from other brands

26 products
Cross-section drawing to size: Deep groove ball, 75 × 115 × 20 mm
You are viewingNSK 6015ZZCM D EEMS5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 60156015open, no protection, normal clearance, standard designCT75 × 115 × 2060 pcs€2.69Request a quote
  • Photo: 60156015open, no protection, normal clearance, standard designSKF75 × 115 × 205 pcs€31.06Request a quote
  • Cross-section drawing to size: Deep groove ball, 75 × 115 × 20 mm6015 Nopen, no protection, normal clearance, groove for a snap ringCT75 × 115 × 20available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6015 P66015 P6open, no protection, normal clearance, precision class P6, standard designDKF75 × 115 × 20available to orderon requestRequest a quote
  • Drawing: 6015 M6015 Mopen, no protection, normal clearance, MFAG75 × 115 × 20available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60156015open, no protection, normal clearance, standard designKG75 × 115 × 20available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 75 × 115 × 20 mm6015 Nopen, no protection, normal clearance, groove for a snap ringKG75 × 115 × 20available to orderon requestRequest a quote
  • Drawing: 6015CM 56015CM 5open, no protection, 5NSK75 × 115 × 20available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6015 C36015 C3open, no protection, clearance C3, standard designSKF75 × 115 × 20out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 6015 ZZ6015 ZZmetal shields on both sides, normal clearance, standard designCT75 × 115 × 20116 pcs€4.29Request a quote
02

Details

what this bearing is, questions

About the bearing

D 115d 75B 20
d×D×Bsize 75 × 115 × 20mm

Deep groove ball bearing 6015-RS, design D: contact seal on one side. Under GOST the same bearing is designated 160115.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 160115?

It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0115 corresponds to the ISO base 6015. Size 75 × 115 × 20 mm, a full equivalent of 6015-RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet