+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6007DDUCM D NS7S5: ⌀35 × ⌀62 × 14 mm⌀62⌀35146007DDUCM D NS7S5D
Fig. 1: 6007DDUCM D NS7S5, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6007DDUCM D NS7S5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6007DDUCM D NS7S5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 53 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
14 mm
Width BRing width. Source: supplier data
Seal
Dcontact seal on one side
Clearance
CM
01

Equivalents

the same size 35 × 62 × 14 from other brands

56 products
Cross-section drawing to size: Deep groove ball, 35 × 62 × 14 mm
You are viewingNSK 6007DDUCM D NS7S5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6007 2RS6007 2RScontact seals on both sides, normal clearance, standard designCT35 × 62 × 143,072 pcs€0.73Request a quote
  • Series illustration (not a photo of this item): 6007 2RS6007 2RScontact seals on both sides, normal clearance, standard designNTE35 × 62 × 14356 pcs€1.40Request a quote
  • Photo: 6007.2RSR6007.2RSRcontact seals on both sides, normal clearance, standard designFAG35 × 62 × 1420 pcs€4.02Request a quote
  • Series illustration (not a photo of this item): 6007 2RS C36007 2RS C3contact seals on both sides, clearance C3, standard designKoyo35 × 62 × 1430 pcs€4.55Request a quote
  • Drawing: 6007 LLUC3/5K6007 LLUC3/5Kcontact seals on both sides, clearance C3, 5KNTN35 × 62 × 1410 pcs€5.46Request a quote
  • Type diagram, no dimensions: ball6007 LLUCM/5Kcontact seals on both sides, 5K, CM: not decodedNTN35 × 62 × ?20 pcs€5.46Request a quote
  • Photo: 6007 2RS6007 2RScontact seals on both sides, normal clearance, standard designKLT35 × 62 × 14available to order€0.90Request a quote
  • Photo: 6007 2RS6007 2RScontact seals on both sides, normal clearance, standard designZ&S35 × 62 × 14available to order€2.03Request a quote
  • Photo: 6007 2RS6007 2RScontact seals on both sides, normal clearance, standard designCX35 × 62 × 14available to order€2.25Request a quote
  • Series illustration (not a photo of this item): 6007-2RS16007-2RS1contact seals on both sides, normal clearance, standard designSKF35 × 62 × 14available to order€5.13Request a quote
02

Details

what this bearing is, questions

About the bearing

D 62d 35B 14
d×D×Bsize 35 × 62 × 14mm

Deep groove ball bearing 6007-RS, design D: contact seal on one side. Under GOST the same bearing is designated 160107.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 160107?

It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0107 corresponds to the ISO base 6007. Size 35 × 62 × 14 mm, a full equivalent of 6007-RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet