+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 32212 A: ⌀60 × ⌀110 × 29.75 mm⌀110⌀60B 28T 29.75C 24α32212 A
Fig. 1: 32212 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 32212 A

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing NSK 32212 A

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 7 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
28 mm
Width BRing width. Source: supplier data
T
29.75 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
Cup width C
24 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
01

Equivalents

the same size 60 × 110 × 29.75 from other brands

13 products
Series illustration (not a photo of this item): 32212 A
You are viewingNSK 32212 A

Everything the number specifies matches: series 322, 60 × 110 × 28 mm, special design. The codes in the number are read against the NSK catalogue.

  • Series illustration (not a photo of this item): 32212 A32212 AThis bearingNSK60 × 110 × 28available to orderon requestyou are here
  • Photo: 32212 A32212 AZ&S60 × 110 × 28out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 60 × 110 × 29.75mm

Tapered roller bearing 32212. Under GOST the same bearing is designated 7512.

Frequently asked questions

What is 7512?

It is the same bearing under GOST 3189-89: 7512 corresponds to the ISO base 32212. Size 60 × 110 × 29.75 mm, a full equivalent of 32212.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet