+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22315EAKE4 *H* 5: ⌀75 × ⌀160 × 55 mm⌀160⌀755522315EAKE4 *H* 5
Fig. 1: 22315EAKE4 *H* 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22315EAKE4 *H* 5

Load: radial high; axial medium, on both sidesSpherical roller

Bearing NSK 22315EAKE4 *H* 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 28 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
55 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 75 × 160 × 55 from other brands

29 products
Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm
You are viewingNSK 22315EAKE4 *H* 5

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm22315 CA/W33CA, lubrication groove and holesCT75 × 160 × 5554 pcs€30.60Request a quote
  • Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm22315 CAW33CA, lubrication groove and holesNTE75 × 160 × 557 pcs€41.03Request a quote
  • Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm22315 MBW33MB, lubrication groove and holesNTE75 × 160 × 55available to order€45.98Request a quote
  • Photo: 22315 EK22315 EKE, 1:12 tapered boreSKF75 × 160 × 55available to order€150.11Request a quote
  • Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm22315 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedCT75 × 160 × 55available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm22315 MBKW33MB, lubrication groove and holes, 1:12 tapered boreCT75 × 160 × 55available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22315 CW3322315 CW33CW33CT75 × 160 × 55available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm22315CCKW33CC, lubrication groove and holes, 1:12 tapered boreDYZV75 × 160 × 55available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm22315MBK/W33C3clearance C3, MB, lubrication groove and holes, 1:12 tapered boreDYZV75 × 160 × 55available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 75 × 160 × 55 mm22315MBKW33MB, lubrication groove and holes, 1:12 tapered boreDYZV75 × 160 × 55available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 160 × 55mm

Spherical roller bearing 22315 K. Under GOST the same bearing is designated 153615.

Frequently asked questions

What is 153615?

It is the same bearing under GOST 3189-89: 153615 corresponds to the ISO base 22315 K. Size 75 × 160 × 55 mm, a full equivalent of 22315 K.

Will 22315 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet