+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22207CE4S11 5: ⌀35 × ⌀72 × 23 mm⌀72⌀352322207CE4S11 5
Fig. 1: 22207CE4S11 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22207CE4S11 5

Load: radial high; axial medium, on both sidesSpherical roller

Bearing NSK 22207CE4S11 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 15 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
23 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 35 × 72 × 23 from other brands

18 products
Cross-section drawing to size: Spherical roller, 35 × 72 × 23 mm
You are viewingNSK 22207CE4S11 5

Everything the number specifies matches: series 222, 35 × 72 × 23 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NSK catalogue.

  • Cross-section drawing to size: Spherical roller, 35 × 72 × 23 mm22207CE4S11 5This bearingNSK35 × 72 × 23available to orderon requestyou are here
  • Series illustration (not a photo of this item): 22207 C/W3322207 C/W33CT35 × 72 × 23447 pcs€3.66Request a quote
  • Photo: 22207 CC W3322207 CC W33Z&S35 × 72 × 23available to order€15.35Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 72 × 23mm

Spherical roller bearing 22207.

Frequently asked questions

Will 22207 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet