+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 16014: ⌀70 × ⌀110 × 13 mm16014
Fig. 1: 16014, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16014

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 16014

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
2 exact, 6 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
13 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 70 × 110 × 13 from other brands

8 products
Series illustration (not a photo of this item): 16014
You are viewingNSK 16014

Everything the number specifies matches: series 160, 70 × 110 × 13 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NSK catalogue.

  • Series illustration (not a photo of this item): 1601416014This bearingNSK70 × 110 × 13available to orderon requestyou are here
  • Series illustration (not a photo of this item): 1601416014CT70 × 110 × 13598 pcs€2.29Request a quote
02

Details

what this bearing is, questions

About the bearing

D 110d 70B 13
d×D×Bsize 70 × 110 × 13mm

Deep groove ball bearing 16014. Under GOST the same bearing is designated 7000114.

Frequently asked questions

What is 7000114?

It is the same bearing under GOST 3189-89: 7000114 corresponds to the ISO base 16014. Size 70 × 110 × 13 mm, a full equivalent of 16014.

Will 16014 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet