+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 16006CM D 5: ⌀30 × ⌀55 × 9 mm⌀55⌀30916006CM D 5D
Fig. 1: 16006CM D 5, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16006CM D 5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 16006CM D 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 13 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
55 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
9 mm
Width BRing width. Source: supplier data
Seal
Dcontact seal on one side
Clearance
CM
01

Equivalents

the same size 30 × 55 × 9 from other brands

15 products
Cross-section drawing to size: Deep groove ball, 30 × 55 × 9 mm
You are viewingNSK 16006CM D 5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 1600616006open, no protection, normal clearance, standard designCT30 × 55 × 9available to order€0.69Request a quote
  • Series illustration (not a photo of this item): 1600616006open, no protection, normal clearance, standard designKG30 × 55 × 9available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1600616006open, no protection, normal clearance, standard designNEU30 × 55 × 9out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 1600616006open, no protection, normal clearance, standard designNTE30 × 55 × 9available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1600616006open, no protection, normal clearance, standard designSKF30 × 55 × 9available to orderon requestRequest a quote
  • Drawing: 16006 2RS16006 2RScontact seals on both sides, normal clearance, standard designCT30 × 55 × 9available to order€1.12Request a quote
  • Drawing: 16006 2RS16006 2RScontact seals on both sides, normal clearance, standard designno brand30 × 55 × 9available to orderon requestRequest a quote
  • Drawing: SS 16006 2RSSS 16006 2RScontact seals on both sides, normal clearance, stainless steelIBB30 × 55 × 9available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 30 × 55 × 9 mmS 16006 2RScontact seals on both sides, S: not decodedZEN30 × 55 × 9available to orderon requestRequest a quote
  • Drawing: 16006 ZZ16006 ZZmetal shields on both sides, normal clearance, standard designno brand30 × 55 × 9available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 55d 30B 9
d×D×Bsize 30 × 55 × 9mm

Deep groove ball bearing 16006-RS, design D: contact seal on one side.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet