+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 16005CM D 5: ⌀25 × ⌀47 × 8 mm⌀47⌀25816005CM D 5D
Fig. 1: 16005CM D 5, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16005CM D 5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 16005CM D 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 8 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
8 mm
Width BRing width. Source: supplier data
Seal
Dcontact seal on one side
Clearance
CM
01

Equivalents

the same size 25 × 47 × 8 from other brands

9 products
Cross-section drawing to size: Deep groove ball, 25 × 47 × 8 mm
You are viewingNSK 16005CM D 5

Same size, different design: the difference is written in the row.

  • Drawing: 16005 2RS16005 2RScontact seals on both sides, normal clearance, standard designCT25 × 47 × 8371 pcs€0.65Request a quote
  • Drawing: 16005 2RS16005 2RScontact seals on both sides, normal clearance, standard designno brand25 × 47 × 8available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 25 × 47 × 8 mmS 16005 2RScontact seals on both sides, S: not decodedZEN25 × 47 × 8available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1600516005open, no protection, normal clearance, standard designCT25 × 47 × 8130 pcs€0.63Request a quote
  • Series illustration (not a photo of this item): 1600516005open, no protection, normal clearance, standard designNTE25 × 47 × 8available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1600516005open, no protection, normal clearance, standard designSKF25 × 47 × 8available to orderon requestRequest a quote
  • Drawing: 16005 ZZ16005 ZZmetal shields on both sides, normal clearance, standard designCT25 × 47 × 860 pcs€0.68Request a quote
  • Type diagram, no dimensions: ball16005 A 2Zmetal shields on both sides, A: not decodedFAG25 × 47 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 47d 25B 8
d×D×Bsize 25 × 47 × 8mm

Deep groove ball bearing 16005-RS, design D: contact seal on one side.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet