+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 1210TNG N 5: ⌀50 × ⌀90 × 20 mm⌀90⌀50201210TNG N 5
Fig. 1: 1210TNG N 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1210TNG N 5

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing NSK 1210TNG N 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 20 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
20 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 50 × 90 × 20 from other brands

24 products
Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm
You are viewingNSK 1210TNG N 5

Everything the number specifies matches: series 12, 50 × 90 × 20 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NSK catalogue.

  • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210TNG N 5This bearingNSK50 × 90 × 20available to orderon requestyou are here
  • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210TNGNEUWEG50 × 90 × 20available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 50 × 90 × 20 mm1210 5NSK50 × 90 × 20available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 90 × 20mm

Self-aligning ball bearing 1210. Under GOST the same bearing is designated 1210.

Frequently asked questions

What is 1210?

It is the same bearing under GOST 3189-89: 1210 corresponds to the ISO base 1210. Size 50 × 90 × 20 mm, a full equivalent of 1210.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet