+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
NEU
Drawing of 6211 2RS C3: ⌀55 × ⌀100 × 21 mm6211 2RS C32RS
Fig. 1: 6211 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
Bearing NEU 6211 2RS C3 — photo 1
Bearing NEU 6211 2RS C3 — photo 2
Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NEU 6211 2RS C3

€7.90per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
OEM number
512.01.240, 532.03.310
Equivalents
4 exact, 44 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
21 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
C3
m
0.61 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 55 × 100 × 21 from other brands

48 products
Photo: 6211 2RS C3
You are viewingNEU 6211 2RS C3
€7.90baseline for the price comparison

Everything the number specifies matches: series 62, 55 × 100 × 21 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NEU catalogue.

Under the price: the difference from the price of this bearing (€7.90).
02

Details

what this bearing is, questions

About the bearing

D 100d 55B 21
d×D×Bsize 55 × 100 × 21mm
mweight 0.61kg

Deep groove ball bearing 6211-2RS C3, design 2RS: contact seals on both sides.

M: NEU data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet