+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
NEU
Drawing of 6201: ⌀12 × ⌀32 × 10 mm6201
Fig. 1: 6201, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6201

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NEU 6201

€0.81per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
6 exact, 56 approximate
d
12 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
32 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
10 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.037 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 12 × 32 × 10 from other brands

63 products
Photo: 6201
You are viewingNEU 6201
€0.81baseline for the price comparison

Everything the number specifies matches: series 62, 12 × 32 × 10 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NEU catalogue.

Under the price: the difference from the price of this bearing (€0.81).
02

Details

what this bearing is, questions

About the bearing

D 32d 12B 10
d×D×Bsize 12 × 32 × 10mm
mweight 0.037kg

Deep groove ball bearing 6201. Under GOST the same bearing is designated 201.

M: NEU data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 201?

It is the same bearing under GOST 3189-89: 201 corresponds to the ISO base 6201. Size 12 × 32 × 10 mm, a full equivalent of 6201.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet