+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
NEU
Drawing of 16007: ⌀35 × ⌀62 × 9 mm16007
Fig. 1: 16007, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16007

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NEU 16007

€2.14per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
9 exact, 8 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
9 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.105 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 35 × 62 × 9 from other brands

18 products
Photo: 16007
You are viewingNEU 16007
€2.14baseline for the price comparison

Everything the number specifies matches: series 160, 35 × 62 × 9 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NEU catalogue.

Under the price: the difference from the price of this bearing (€2.14).
02

Details

what this bearing is, questions

About the bearing

D 62d 35B 9
d×D×Bsize 35 × 62 × 9mm
mweight 0.105kg

Deep groove ball bearing 16007. Under GOST the same bearing is designated 7000107.

M: NEU data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7000107?

It is the same bearing under GOST 3189-89: 7000107 corresponds to the ISO base 16007. Size 35 × 62 × 9 mm, a full equivalent of 16007.

Will 16007 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet