+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6010ZZE C3: ⌀50 × ⌀80 × 16 mm6010ZZE C3ZZE
Fig. 1: 6010ZZE C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6010ZZE C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NACHI 6010ZZE C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 31 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
16 mm
Width BRing width. Source: supplier data
Seal
ZZEmetal shields on both sides
Clearance
C3
C
21.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
16.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.264 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 80 × 16 from other brands

34 products
Series illustration (not a photo of this item): 6010ZZE C3
You are viewingNACHI 6010ZZE C3

Everything the number specifies matches: series 60, 50 × 80 × 16 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NACHI catalogue.

  • Series illustration (not a photo of this item): 6010ZZE C36010ZZE C3This bearingNACHI50 × 80 × 16available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6010-2Z/C36010-2Z/C3SKF50 × 80 × 16available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6010 ZZ C36010 ZZ C3SKF50 × 80 × 16out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 80d 50B 16
d×D×Bsize 50 × 80 × 16mm
Cdynamic 21.8kN
C0static 16.6kN
mweight 0.264kg

Deep groove ball bearing 6010-ZZ C3, design ZZE: metal shields on both sides.

C, C₀, m: NACHI data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet