+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6005 2NSE C3: ⌀25 × ⌀47 × 12 mm6005 2NSE C32NSE
Fig. 1: 6005 2NSE C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6005 2NSE C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NACHI 6005 2NSE C3

€2.52per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
7 exact, 54 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
12 mm
Width BRing width. Source: two supplier sources
Seal
2NSEcontact seals on both sides
Clearance
C3
C
10.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
5.85 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.079 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 25 × 47 × 12 from other brands

62 products
Series illustration (not a photo of this item): 6005 2NSE C3
You are viewingNACHI 6005 2NSE C3
€2.52baseline for the price comparison

Everything the number specifies matches: series 60, 25 × 47 × 12 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the NACHI catalogue.

Under the price: the difference from the price of this bearing (€2.52).
02

Details

what this bearing is, questions

About the bearing

D 47d 25B 12
d×D×Bsize 25 × 47 × 12mm
Cdynamic 10.1kN
C0static 5.85kN
mweight 0.079kg

Deep groove ball bearing 6005-2RS C3, design 2NSE: contact seals on both sides.

C, C₀, m: NACHI data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet