+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
M.G.M.
Drawing of 2313 K: ⌀65 × ⌀140 × 48 mm⌀140⌀65482313 K
Fig. 1: 2313 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2313 K

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing MGM 2313 K

€59.24per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 6 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
48 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
3.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 65 × 140 × 48 from other brands

8 products
Photo: 2313 K
You are viewingM.G.M. 2313 K
€59.24baseline for the price comparison

Everything the number specifies matches: series 23, 65 × 140 × 48 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the M.G.M. catalogue.

  • Photo: 2313 K2313 KThis bearingM.G.M.65 × 140 × 48available to order€59.24you are here
  • Series illustration (not a photo of this item): 2313 K2313 KSKF65 × 140 × 48available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€59.24).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 48mm
mweight 3.25kg

Self-aligning ball bearing 2313 K.

M: M.G.M. data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet