+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
MGK
Drawing of SS 3203 2RS: ⌀17 × ⌀40 × 17.5 mm⌀40⌀1717.5SS 3203 2RS2RS
Fig. 1: SS 3203 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of SS 3203 2RS

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing MGK SS 3203 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 30 approximate
d
17 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
40 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
17.5 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
01

Equivalents

the same size 17 × 40 × 17.5 from other brands

36 products
Cross-section drawing to size: Angular contact ball, 17 × 40 × 17.5 mm
You are viewingMGK SS 3203 2RS

Everything the number specifies matches: series 32, 17 × 40 × 17.5 mm, contact seals on both sides, stainless steel; any contact angle. The codes in the number are read against the MGK catalogue.

  • Cross-section drawing to size: Angular contact ball, 17 × 40 × 17.5 mmSS 3203 2RSThis bearingMGK17 × 40 × 17.5available to orderon requestyou are here
  • Cross-section drawing to size: Angular contact ball, 17 × 40 × 17.5 mmSS 3203 2RSNAF17 × 40 × 17.5available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 40d 17B 17.5
d×D×Bsize 17 × 40 × 17.5mm

Angular contact ball bearing 3203-2RS SS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet