+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
MGK
Drawing of 695 ZZ: ⌀5 × ⌀13 × 4 mm695 ZZZZ
Fig. 1: 695 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 695 ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing MGK 695 ZZ

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 0 approximate
d
5 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
13 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
4 mm
Width BRing width. Source: supplier data
Seal
ZZshields, both sides
Clearance
normal clearance
01

Equivalents

the same size 5 × 13 × 4 from other brands

4 products
Series illustration (not a photo of this item): 695 ZZ
You are viewingMGK 695 ZZ

Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the MGK catalogue.

  • Series illustration (not a photo of this item): 695 ZZ695 ZZThis bearingMGK5 × 13 × 4available to orderon requestyou are here
  • Series illustration (not a photo of this item): 695 ZZ695 ZZCT5 × 13 × 4available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 695 ZZ695 ZZIBB5 × 13 × 4available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 695 ZZ695 ZZKG5 × 13 × 4available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 13d 5B 4
d×D×Bsize 5 × 13 × 4mm

Deep groove ball bearing 695-ZZ, design ZZ: metal shields on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet