+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6322 2RS C3: ⌀110 × ⌀240 × 50 mm6322 2RS C32RS
Fig. 1: 6322 2RS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6322 2RS C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing Koyo 6322 2RS C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 16 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
240 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
50 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
C3
01

Equivalents

the same size 110 × 240 × 50 from other brands

18 products
Series illustration (not a photo of this item): 6322 2RS C3
You are viewingKoyo 6322 2RS C3

Everything the number specifies matches: series 63, 110 × 240 × 50 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the Koyo catalogue.

  • Series illustration (not a photo of this item): 6322 2RS C36322 2RS C3This bearingKoyo110 × 240 × 50available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6322 2RS C36322 2RS C3ZEN110 × 240 × 50available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 240d 110B 50
d×D×Bsize 110 × 240 × 50mm

Deep groove ball bearing 6322-2RS C3, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet