+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6201 2RS: ⌀12 × ⌀32 × 10 mm6201 2RS2RS
Fig. 1: 6201 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6201 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing Koyo 6201 2RS

€1.97per piece
In stock: 203 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
13 exact, 46 approximate
d
12 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
32 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
10 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
C0
3.05 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.037 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 12 × 32 × 10 from other brands

64 products
Photo: 6201 2RS
You are viewingKoyo 6201 2RS
€1.97baseline for the price comparison

Everything the number specifies matches: series 62, 12 × 32 × 10 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Koyo catalogue.

Under the price: the difference from the price of this bearing (€1.97).
02

Details

what this bearing is, questions

About the bearing

D 32d 12B 10
d×D×Bsize 12 × 32 × 10mm
C0static 3.05kN
mweight 0.037kg

Deep groove ball bearing 6201-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180201.

C₀, m: Koyo data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180201?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0201 corresponds to the ISO base 6201. Size 12 × 32 × 10 mm, a full equivalent of 6201-2RS.

Will 6201 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet