+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 62/28 2RS C3: ⌀28 × ⌀58 × 16 mm62/28 2RS C32RS
Fig. 1: 62/28 2RS C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 62/28 2RS C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing KOYO 62/28 2RS C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 2 approximate
d
28 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
58 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
C3
C0
9.75 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.173 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 28 × 58 × 16 from other brands

4 products
Photo: 62/28 2RS C3
You are viewingKoyo 62/28 2RS C3

Everything the number specifies matches: series 62/, 28 × 58 × 16 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the Koyo catalogue.

  • Photo: 62/28 2RS C362/28 2RS C3This bearingKoyo28 × 58 × 16out of stockon requestyou are here
  • Photo: 62/28 2RS C362/28 2RS C3Z&S28 × 58 × 16out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 58d 28B 16
d×D×Bsize 28 × 58 × 16mm
C0static 9.75kN
mweight 0.173kg

Deep groove ball bearing 62/28-2RS C3, design 2RS: contact seals on both sides.

C₀, m: Koyo data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet