+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
KLT
Drawing of 3304 2RS: ⌀20 × ⌀52 × 22.2 mm⌀52⌀2022.23304 2RS2RS
Fig. 1: 3304 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3304 2RS

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing KLT 3304 2RS

€2.50per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
6 exact, 17 approximate
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
22.2 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
m
0.22 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 20 × 52 × 22.2 from other brands

25 products
Photo: 3304 2RS
You are viewingKLT 3304 2RS
€2.50baseline for the price comparison

Everything the number specifies matches: series 33, 20 × 52 × 22.2 mm, contact seals on both sides, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the KLT catalogue.

Under the price: the difference from the price of this bearing (€2.50).
02

Details

what this bearing is, questions

About the bearing

D 52d 20B 22.2
d×D×Bsize 20 × 52 × 22.2mm
mweight 0.22kg

Angular contact ball bearing 3304-2RS, design 2RS: contact seals on both sides.

M: KLT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet