+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
KG
Simplified drawing of the bearing per ISO 8826-1, dimensions of 7804: ⌀19.05 × ⌀45.25 mm⌀45.25⌀19.057804
Fig. 1: 7804, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type; GOST number = ISO LM11949/10, dimensions from the GOST↔ISO table CX p.789. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7804

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing KG 7804

€1.22per piece
In stock: 53 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
3 exact, 0 approximate
d
19.05 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
45.25 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
01

Equivalents

the same size 19.05 × 45.25 from other brands

9 products
Type diagram, no dimensions: bearing
You are viewingKG 7804
€1.22baseline for the price comparison

Everything the number specifies matches: series 78, 19.05 × 45.25 mm, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

  • Type diagram, no dimensions: bearing7804This bearingKG19.05 × 45.25 × ?53 pcs€1.22you are here
  • Cross-section drawing to size: Tapered roller, 19.05 × 45.25 × T 15.494 mm7804CT19.05 × 45.25 × ?136 pcs€0.82−€0.40Request a quote
  • Type diagram, no dimensions: bearing7804NTE19.05 × 45.25 × ?available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€1.22).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 19.05 × 45.25mm

Tapered roller bearing 7804.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet