+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of 22320 MBW33: ⌀100 × ⌀215 × 73 mm⌀215⌀1007322320 MBW33
Fig. 1: 22320 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22320 MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing KG 22320 MBW33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 23 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
215 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
73 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 100 × 215 × 73 from other brands

26 products
Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm
You are viewingKG 22320 MBW33

Everything the number specifies matches: series 223, 100 × 215 × 73 mm, open, no protection, normal clearance, special design. The codes in the number are read against the KG catalogue.

  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 MBW33This bearingKG100 × 215 × 73available to orderon requestyou are here
  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 MBW33NTE100 × 215 × 73available to order€94.26Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 100 × 215 × 73mm

Spherical roller bearing 22320. Under GOST the same bearing is designated 53620.

Frequently asked questions

What is 53620?

It is the same bearing under GOST 3189-89: 53620 corresponds to the ISO base 22320. Size 100 × 215 × 73 mm, a full equivalent of 22320.

Will 22320 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet