+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of 22317 CW33: ⌀85 × ⌀180 × 60 mm⌀180⌀856022317 CW33
Fig. 1: 22317 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22317 CW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing KG 22317 CW33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 11 approximate
d
85 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
60 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 85 × 180 × 60 from other brands

12 products
Series illustration (not a photo of this item): 22317 CW33
You are viewingKG 22317 CW33

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317 CA/W33CA, lubrication groove and holesCT85 × 180 × 6027 pcs€39.40Request a quote
  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317 CAW33CA, lubrication groove and holesNTE85 × 180 × 6010 pcs€55.80Request a quote
  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317 MBW33MB, lubrication groove and holesNTE85 × 180 × 60available to order€62.54Request a quote
  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317MBW33MB, lubrication groove and holesDYZV85 × 180 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317-E1E1FAG85 × 180 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317-E1-XLE1, XLFAG85 × 180 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317 KMBW33MB, lubrication groove and holes, 1:12 tapered boreNIS85 × 180 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317EAKE4 *H* 55, EA, H, lubrication groove and holes, 1:12 tapered boreNSK85 × 180 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 85 × 180 × 60 mm22317 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE85 × 180 × 60available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22317 E22317 EESKF85 × 180 × 60available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 85 × 180 × 60mm

Spherical roller bearing 22317.

Frequently asked questions

Will 22317 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet