+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of 22310 MBW33: ⌀50 × ⌀110 × 40 mm⌀110⌀504022310 MBW33
Fig. 1: 22310 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22310 MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing KG 22310 MBW33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 21 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
40 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 50 × 110 × 40 from other brands

26 products
Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm
You are viewingKG 22310 MBW33

Everything the number specifies matches: series 223, 50 × 110 × 40 mm, open, no protection, normal clearance, special design. The codes in the number are read against the KG catalogue.

  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 MBW33This bearingKG50 × 110 × 40available to orderon requestyou are here
  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 MBW33CT50 × 110 × 40available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 110 × 40mm

Spherical roller bearing 22310. Under GOST the same bearing is designated 53610.

Frequently asked questions

What is 53610?

It is the same bearing under GOST 3189-89: 53610 corresponds to the ISO base 22310. Size 50 × 110 × 40 mm, a full equivalent of 22310.

Will 22310 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet