+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of 22224 MBW33: ⌀120 × ⌀215 × 58 mm⌀215⌀1205822224 MBW33
Fig. 1: 22224 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22224 MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing KG 22224 MBW33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 17 approximate
d
120 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
215 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
58 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 120 × 215 × 58 from other brands

21 products
Cross-section drawing to size: Spherical roller, 120 × 215 × 58 mm
You are viewingKG 22224 MBW33

Everything the number specifies matches: series 222, 120 × 215 × 58 mm, open, no protection, normal clearance, special design. The codes in the number are read against the KG catalogue.

  • Cross-section drawing to size: Spherical roller, 120 × 215 × 58 mm22224 MBW33This bearingKG120 × 215 × 58available to orderon requestyou are here
  • Cross-section drawing to size: Spherical roller, 120 × 215 × 58 mm22224 MBW33NTE120 × 215 × 58available to order€78.16Request a quote
  • Cross-section drawing to size: Spherical roller, 120 × 215 × 58 mm22224MBW33DYZV120 × 215 × 58available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 120 × 215 × 58mm

Spherical roller bearing 22224. Under GOST the same bearing is designated 53524.

Frequently asked questions

What is 53524?

It is the same bearing under GOST 3189-89: 53524 corresponds to the ISO base 22224. Size 120 × 215 × 58 mm, a full equivalent of 22224.

Will 22224 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet