+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
KG
Drawing of 2215: ⌀75 × ⌀130 × 31 mm⌀130⌀75312215
Fig. 1: 2215, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2215

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing KG 2215

€10.18per piece
In stock: 12 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
4 exact, 4 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 75 × 130 × 31 from other brands

8 products
Series illustration (not a photo of this item): 2215
You are viewingKG 2215
€10.18baseline for the price comparison

Everything the number specifies matches: series 22, 75 × 130 × 31 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

  • Series illustration (not a photo of this item): 22152215This bearingKG75 × 130 × 3112 pcs€10.18you are here
  • Photo: 22152215GPZ75 × 130 × 31available to order€27.97+€17.79Request a quote
  • Photo: 22152215M.G.M.75 × 130 × 31available to order€34.56+€24.38Request a quote
  • Series illustration (not a photo of this item): 22152215ZKL75 × 130 × 31out of stockon requestRequest a quote

Under the price: the difference from the price of this bearing (€10.18).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 130 × 31mm

Self-aligning ball bearing 2215.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet