+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of 2210: ⌀50 × ⌀90 × 23 mm⌀90⌀50232210
Fig. 1: 2210, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2210

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing KG 2210

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 9 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
23 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 50 × 90 × 23 from other brands

13 products
Series illustration (not a photo of this item): 2210
You are viewingKG 2210

Everything the number specifies matches: series 22, 50 × 90 × 23 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

  • Series illustration (not a photo of this item): 22102210This bearingKG50 × 90 × 23available to orderon requestyou are here
  • Series illustration (not a photo of this item): 22102210CT50 × 90 × 2399 pcs€3.54Request a quote
  • Photo: 22102210ZWZ50 × 90 × 23available to order€8.03Request a quote
  • Series illustration (not a photo of this item): 22102210no brand50 × 90 × 23available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 90 × 23mm

Self-aligning ball bearing 2210. Under GOST the same bearing is designated 1510.

Frequently asked questions

What is 1510?

It is the same bearing under GOST 3189-89: 1510 corresponds to the ISO base 2210. Size 50 × 90 × 23 mm, a full equivalent of 2210.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet