+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
KG
Drawing of 1312: ⌀60 × ⌀130 × 31 mm⌀130⌀60311312
Fig. 1: 1312, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1312

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing KG 1312

€27.97per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
4 exact, 5 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.95 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 130 × 31 from other brands

9 products
Photo: 1312
You are viewingKG 1312
€27.97baseline for the price comparison

Everything the number specifies matches: series 13, 60 × 130 × 31 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

  • Photo: 13121312This bearingKG60 × 130 × 31available to order€27.97you are here
  • Series illustration (not a photo of this item): 13121312CT60 × 130 × 31123 pcs€7.85−€20.12Request a quote
  • Series illustration (not a photo of this item): 13121312GPZ60 × 130 × 31out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 13121312Koyo60 × 130 × 31available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€27.97).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 130 × 31mm
mweight 1.95kg

Self-aligning ball bearing 1312. Under GOST the same bearing is designated 1312.

M: KG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1312?

It is the same bearing under GOST 3189-89: 1312 corresponds to the ISO base 1312. Size 60 × 130 × 31 mm, a full equivalent of 1312.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet