+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of 1215: ⌀75 × ⌀130 × 25 mm⌀130⌀75251215
Fig. 1: 1215, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1215

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing KG 1215

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
5 exact, 5 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
25 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 75 × 130 × 25 from other brands

10 products
Series illustration (not a photo of this item): 1215
You are viewingKG 1215

Everything the number specifies matches: series 12, 75 × 130 × 25 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

  • Series illustration (not a photo of this item): 12151215This bearingKG75 × 130 × 25available to orderon requestyou are here
  • Series illustration (not a photo of this item): 12151215CT75 × 130 × 25195 pcs€6.16Request a quote
  • Photo: 12151215URB75 × 130 × 25available to order€25.47Request a quote
  • Series illustration (not a photo of this item): 12151215no brand75 × 130 × 25available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 12151215SKF75 × 130 × 25available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 130 × 25mm

Self-aligning ball bearing 1215. Under GOST the same bearing is designated 1215.

Frequently asked questions

What is 1215?

It is the same bearing under GOST 3189-89: 1215 corresponds to the ISO base 1215. Size 75 × 130 × 25 mm, a full equivalent of 1215.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet