+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of 1201: ⌀12 × ⌀32 × 10 mm⌀32⌀12101201
Fig. 1: 1201, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1201

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing KG 1201

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
4 exact, 1 approximate
d
12 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
32 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
10 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 12 × 32 × 10 from other brands

5 products
Series illustration (not a photo of this item): 1201
You are viewingKG 1201

Everything the number specifies matches: series 12, 12 × 32 × 10 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

  • Series illustration (not a photo of this item): 12011201This bearingKG12 × 32 × 10available to orderon requestyou are here
  • Series illustration (not a photo of this item): 12011201CT12 × 32 × 1067 pcs€0.72Request a quote
  • Series illustration (not a photo of this item): 12011201GPZ12 × 32 × 12out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 12011201NTE12 × 32 × 10available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 12 × 32 × 10mm

Self-aligning ball bearing 1201. Under GOST the same bearing is designated 1201.

Frequently asked questions

What is 1201?

It is the same bearing under GOST 3189-89: 1201 corresponds to the ISO base 1201. Size 12 × 32 × 10 mm, a full equivalent of 1201.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet