+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KBS
Drawing of 1316 K: ⌀80 × ⌀170 × 39 mm⌀170⌀80391316 K
Fig. 1: 1316 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1316 K

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing KBS 1316 K

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
2 exact, 9 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
39 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 80 × 170 × 39 from other brands

14 products
Series illustration (not a photo of this item): 1316 K
You are viewingKBS 1316 K

Everything the number specifies matches: series 13, 80 × 170 × 39 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the KBS catalogue.

  • Series illustration (not a photo of this item): 1316 K1316 KThis bearingKBS80 × 170 × 39available to orderon requestyou are here
  • Series illustration (not a photo of this item): 1316 K1316 KSKF80 × 170 × 39available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 80 × 170 × 39mm

Self-aligning ball bearing 1316 K. Under GOST the same bearing is designated 111316.

Frequently asked questions

What is 111316?

It is the same bearing under GOST 3189-89: 111316 corresponds to the ISO base 1316 K. Size 80 × 170 × 39 mm, a full equivalent of 1316 K.

Will 1316 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet