+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
ISB
Drawing of 32032: ⌀160 × ⌀240 × 51 mm⌀240⌀160B 51T 51C 38α32032
Fig. 1: 32032, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 32032

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing ISB 32032

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
5 exact, 1 approximate
d
160 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
240 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
51 mm
Width BRing width. Source: supplier data
T
51 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
Cup width C
38 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
01

Equivalents

the same size 160 × 240 × 51 from other brands

6 products
Series illustration (not a photo of this item): 32032
You are viewingISB 32032

Everything the number specifies matches: series 320, 160 × 240 × 51 mm, ordinary steel, design without special letters. The codes in the number are read against the ISB catalogue.

  • Series illustration (not a photo of this item): 3203232032This bearingISB160 × 240 × 51available to orderon requestyou are here
  • Series illustration (not a photo of this item): 3203232032DYZV160 × 240 × 51available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3203232032KG160 × 240 × 51available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3203232032NTE160 × 240 × 51available to orderon requestRequest a quote
  • Type diagram, no dimensions: bearing2007132SPZ-GROUP160 × 240 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 160 × 240 × 51mm

Tapered roller bearing 32032.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet