+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
IBC
Drawing of 6005.TB.P5: ⌀25 × ⌀47 × 12 mm6005.TB.P5
Fig. 1: 6005.TB.P5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6005.TB.P5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing IBC 6005.TB.P5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 60 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
12 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 25 × 47 × 12 from other brands

64 products
Drawing: 6005.TB.P5
You are viewingIBC 6005.TB.P5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6005 2RS C36005 2RS C3contact seals on both sides, clearance C3, precision class P0, standard designCT25 × 47 × 12180 pcs€0.37Request a quote
  • Series illustration (not a photo of this item): 6005 2RS6005 2RScontact seals on both sides, precision class P0, standard designCT25 × 47 × 1211,894 pcs€0.46Request a quote
  • Series illustration (not a photo of this item): 6005 2RS C3 P6 BBC-R6005 2RS C3 P6 BBC-Rcontact seals on both sides, clearance C3, precision class P6, standard designBBC-R25 × 47 × 12178 pcs€0.85Request a quote
  • Drawing: SS 6005 2RSSS 6005 2RScontact seals on both sides, precision class P0, stainless steelCT25 × 47 × 12160 pcs€1.80Request a quote
  • Series illustration (not a photo of this item): 6005 2NSE6005 2NSEcontact seals on both sides, precision class P0, standard designNACHI25 × 47 × 1290 pcs€2.53Request a quote
  • Series illustration (not a photo of this item): 6005 2HRS6005 2HRScontact seals on both sides, precision class P0, standard designFAG25 × 47 × 12300 pcs€3.01Request a quote
  • Photo: 6005 2RSH6005 2RSHcontact seals on both sides, precision class P0, standard designSKF25 × 47 × 121,520 pcs€3.31Request a quote
  • Type diagram, no dimensions: ball6005 LLUCM/5Kcontact seals on both sides, 5K, CM: not decodedNTN25 × 47 × ?10 pcs€3.60Request a quote
  • Series illustration (not a photo of this item): 6005 2RS6005 2RScontact seals on both sides, precision class P0, standard designNTE25 × 47 × 12available to order€0.60Request a quote
  • Photo: 6005 2RS6005 2RScontact seals on both sides, precision class P0, standard designWBW25 × 47 × 12available to order€0.99Request a quote
02

Details

what this bearing is, questions

About the bearing

D 47d 25B 12
d×D×Bsize 25 × 47 × 12mm

Deep groove ball bearing 6005. Under GOST the same bearing is designated 105.

Frequently asked questions

What is 105?

It is the same bearing under GOST 3189-89: 105 corresponds to the ISO base 6005. Size 25 × 47 × 12 mm, a full equivalent of 6005.

Will 6005 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet