+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
IBB
Drawing of SS 6014 2RS: ⌀70 × ⌀110 × 20 mmSS 6014 2RS2RS
Fig. 1: SS 6014 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of SS 6014 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing IBB SS 6014 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 25 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
20 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
normal clearance
01

Equivalents

the same size 70 × 110 × 20 from other brands

28 products
Drawing: SS 6014 2RS
You are viewingIBB SS 6014 2RS

Everything the number specifies matches: series 60, 70 × 110 × 20 mm, contact seals on both sides, normal clearance, stainless steel. The codes in the number are read against the IBB catalogue.

  • Drawing: SS 6014 2RSSS 6014 2RSThis bearingIBB70 × 110 × 20available to orderon requestyou are here
  • Drawing: SS 6014 2RSSS 6014 2RSNAF70 × 110 × 20available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 110d 70B 20
d×D×Bsize 70 × 110 × 20mm

Deep groove ball bearing 6014-2RS SS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet