+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of NU 215: ⌀75 × ⌀130 × 25 mm⌀130⌀7525NU 215
Fig. 1: NU 215, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
Bearing GPZ NU 215 — photo 1
Load: radial high; no axial loadCylindrical roller NU

Bearing GPZ NU 215

€49.36per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
5 exact, 7 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
25 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.27 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 75 × 130 × 25 from other brands

13 products
Photo: NU 215
You are viewingGPZ NU 215
€49.36baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the GPZ catalogue.

Under the price: the difference from the price of this bearing (€49.36).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 130 × 25mm
mweight 1.27kg

Cylindrical roller NU bearing NU 215.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 215 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet