+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
GPZ
Drawing of NJ 313: ⌀65 × ⌀140 × 33 mm⌀140⌀6533NJ 313
Fig. 1: NJ 313, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 313

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing GPZ NJ 313

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
7 exact, 28 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
33 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
2.3 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 65 × 140 × 33 from other brands

38 products
Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 33 mm
You are viewingGPZ NJ 313

Size and design match across the brand catalogues. The codes in the number are read against the GPZ catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 33 mmNJ 313This bearingGPZ65 × 140 × 33out of stockon requestyou are here
  • Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 33 mmNJ 313CT65 × 140 × 336 pcs€9.92Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 33 mmNJ 313 MCT65 × 140 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 313 ENJ 313 EKG65 × 140 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 313 ENJ 313 ENTE65 × 140 × 33available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 33 mmNJ 313 ECJSKF65 × 140 × 33available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 33 mmNJ 313UTL65 × 140 × 33out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 33mm
mweight 2.3kg

Cylindrical roller NJ bearing NJ 313.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 313 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet