+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Simplified drawing of the bearing per ISO 8826-1, dimensions of 7230KM (30230): ⌀150 × ⌀270 × 45 mm⌀270⌀150457230KM (30230)
Fig. 1: 7230KM (30230), simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7230KM

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing GPZ 7230KM

Supplier’s set and note: (30230)

€121.75per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 0 approximate
d
150 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
270 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
45 mm
Width BRing width. Source: supplier data
Cup width C
38 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
m
10.7 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 150 × 270 × 45 from other brands

5 products
Photo: 7230KM (30230)
You are viewingGPZ 7230KM
€121.75baseline for the price comparison

Not enough data for a firm conclusion: what is missing is written in the row.

Under the price: the difference from the price of this bearing (€121.75).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 150 × 270 × 45mm
mweight 10.7kg

Tapered roller bearing 30230. Under GOST the same bearing is designated 7230.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7230?

It is the same bearing under GOST 3189-89: 7230 corresponds to the ISO base 30230. Size 150 × 270 × 45 mm, a full equivalent of 30230.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet