+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of 7205: ⌀25 × ⌀52 × 15 mm⌀52⌀25157205
Fig. 1: 7205, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7205

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing GPZ 7205

€16.45per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
3 exact, 21 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
m
0.127 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 25 × 52 × 15 from other brands

27 products
Photo: 7205
You are viewingGPZ 7205
€16.45baseline for the price comparison

Everything the number specifies matches: series 72, 25 × 52 × 15 mm, open, no protection, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the GPZ catalogue.

  • Photo: 72057205This bearingGPZ25 × 52 × 15available to order€16.45you are here
  • Series illustration (not a photo of this item): 72057205no brand25 × 52 × 15available to orderon requestRequest a quote
  • Photo: 72057205ZKL25 × 52 × 15out of stockon requestRequest a quote

Under the price: the difference from the price of this bearing (€16.45).
02

Details

what this bearing is, questions

About the bearing

D 52d 25B 15
d×D×Bsize 25 × 52 × 15mm
mweight 0.127kg

Angular contact ball bearing 7205.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet