+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6409 N: ⌀45 × ⌀120 × 29 mm⌀120⌀45296409 N
Fig. 1: 6409 N, simplified drawing per ISO 8826-1. Dimensions in mm
Bearing GPZ 6409 N — photo 1
Bearing GPZ 6409 N — photo 2
Bearing GPZ 6409 N — photo 3
Load: radial medium; axial low, on both sidesDeep groove ball

Bearing GPZ 6409 N

€24.48per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 9 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
29 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.55 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 120 × 29 from other brands

11 products
Photo: 6409 N
You are viewingGPZ 6409 N
€24.48baseline for the price comparison

Everything the number specifies matches: series 64, 45 × 120 × 29 mm, open, no protection, N, normal clearance, special design. The codes in the number are read against the GPZ catalogue.

  • Photo: 6409 N6409 NThis bearingGPZ45 × 120 × 29available to order€24.48you are here
  • Cross-section drawing to size: Deep groove ball, 45 × 120 × 29 mm6409 NCT45 × 120 × 29available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€24.48).
02

Details

what this bearing is, questions

About the bearing

D 120d 45B 29
d×D×Bsize 45 × 120 × 29mm
mweight 1.55kg

Deep groove ball bearing 6409. Under GOST the same bearing is designated 409.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 409?

It is the same bearing under GOST 3189-89: 409 corresponds to the ISO base 6409. Size 45 × 120 × 29 mm, a full equivalent of 6409.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet