+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of 627 ZZ: ⌀7 × ⌀22 × 7 mm627 ZZZZ
Fig. 1: 627 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 627 ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing GPZ 627 ZZ

€2.39per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 0 approximate
d
7 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
22 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
7 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
normal clearance
m
0.013 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 7 × 22 × 7 from other brands

4 products
Photo: 627 ZZ
You are viewingGPZ 627 ZZ
€2.39baseline for the price comparison

Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

Under the price: the difference from the price of this bearing (€2.39).
02

Details

what this bearing is, questions

About the bearing

D 22d 7B 7
d×D×Bsize 7 × 22 × 7mm
mweight 0.013kg

Deep groove ball bearing 627-ZZ, design ZZ: metal shields on both sides.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet