+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of 607: ⌀7 × ⌀19 × 6 mm607
Fig. 1: 607, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 607

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing GPZ 607

€0.58per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
3 exact, 0 approximate
d
7 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
19 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
6 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.008 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 7 × 19 × 6 from other brands

3 products
Photo: 607
You are viewingGPZ 607
€0.58baseline for the price comparison

Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

  • Photo: 607607This bearingGPZ7 × 19 × 6available to order€0.58you are here
  • Series illustration (not a photo of this item): 607607CT7 × 19 × 6available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 607607SKF7 × 19 × 6available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€0.58).
02

Details

what this bearing is, questions

About the bearing

D 19d 7B 6
d×D×Bsize 7 × 19 × 6mm
mweight 0.008kg

Deep groove ball bearing 607. Under GOST the same bearing is designated 17.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 17?

It is the same bearing under GOST 3189-89: 17 corresponds to the ISO base 607. Size 7 × 19 × 6 mm, a full equivalent of 607.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet