+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of 2312: ⌀60 × ⌀130 × 46 mm⌀130⌀60462312
Fig. 1: 2312, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2312

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing GPZ 2312

€47.72per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
7 exact, 7 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
46 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
2.58 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 130 × 46 from other brands

15 products
Photo: 2312
You are viewingGPZ 2312
€47.72baseline for the price comparison

Everything the number specifies matches: series 23, 60 × 130 × 46 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

Under the price: the difference from the price of this bearing (€47.72).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 130 × 46mm
mweight 2.58kg

Self-aligning ball bearing 2312. Under GOST the same bearing is designated 1612.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1612?

It is the same bearing under GOST 3189-89: 1612 corresponds to the ISO base 2312. Size 60 × 130 × 46 mm, a full equivalent of 2312.

Will 2312 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet