+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of 1306: ⌀30 × ⌀72 × 19 mm⌀72⌀30191306
Fig. 1: 1306, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1306

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing GPZ 1306

€7.42per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
5 exact, 5 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
19 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.39 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 30 × 72 × 19 from other brands

12 products
Photo: 1306
You are viewingGPZ 1306
€7.42baseline for the price comparison

Everything the number specifies matches: series 13, 30 × 72 × 19 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GPZ catalogue.

Under the price: the difference from the price of this bearing (€7.42).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 30 × 72 × 19mm
mweight 0.39kg

Self-aligning ball bearing 1306. Under GOST the same bearing is designated 1306.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1306?

It is the same bearing under GOST 3189-89: 1306 corresponds to the ISO base 1306. Size 30 × 72 × 19 mm, a full equivalent of 1306.

Will 1306 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet