+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of 1216 K: ⌀80 × ⌀140 × 26 mm⌀140⌀80261216 K
Fig. 1: 1216 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1216 K

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing GPZ 1216 K

€29.61per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 7 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
26 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.81 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 80 × 140 × 26 from other brands

12 products
Photo: 1216 K
You are viewingGPZ 1216 K
€29.61baseline for the price comparison

Everything the number specifies matches: series 12, 80 × 140 × 26 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the GPZ catalogue.

  • Photo: 1216 K1216 KThis bearingGPZ80 × 140 × 26available to order€29.61you are here
  • Series illustration (not a photo of this item): 1216 K1216 Kno brand80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1216 K1216 KKG80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1216 K1216 KSKF80 × 140 × 26available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€29.61).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 80 × 140 × 26mm
mweight 0.81kg

Self-aligning ball bearing 1216 K. Under GOST the same bearing is designated 111216.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 111216?

It is the same bearing under GOST 3189-89: 111216 corresponds to the ISO base 1216 K. Size 80 × 140 × 26 mm, a full equivalent of 1216 K.

Will 1216 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet