+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6004: ⌀20 × ⌀42 × 12 mm6004
Fig. 1: 6004, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6004

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing GMN 6004

€16.45per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 60 approximate
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
42 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
12 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.069 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 20 × 42 × 12 from other brands

64 products
Photo: 6004
You are viewingGMN 6004
€16.45baseline for the price comparison

Everything the number specifies matches: series 60, 20 × 42 × 12 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the GMN catalogue.

  • Photo: 60046004This bearingGMN20 × 42 × 12available to order€16.45you are here
  • Series illustration (not a photo of this item): 60046004CT20 × 42 × 123,830 pcs€0.36−€16.09Request a quote
  • Photo: 60046004SKF20 × 42 × 12available to order€2.28−€14.17Request a quote
  • Series illustration (not a photo of this item): 60046004KG20 × 42 × 12available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€16.45).
02

Details

what this bearing is, questions

About the bearing

D 42d 20B 12
d×D×Bsize 20 × 42 × 12mm
mweight 0.069kg

Deep groove ball bearing 6004. Under GOST the same bearing is designated 104.

M: GMN data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 104?

It is the same bearing under GOST 3189-89: 104 corresponds to the ISO base 6004. Size 20 × 42 × 12 mm, a full equivalent of 6004.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet