+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
FV
Drawing of 32208 A: ⌀40 × ⌀80 × 24.75 mm⌀80⌀40B 23T 24.75C 19α32208 A
Fig. 1: 32208 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 32208 A

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing FV 32208 A

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 9 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
23 mm
Width BRing width. Source: supplier data
T
24.75 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
Cup width C
19 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
01

Equivalents

the same size 40 × 80 × 24.75 from other brands

14 products
Series illustration (not a photo of this item): 32208 A
You are viewingFV 32208 A

Everything the number specifies matches: series 322, 40 × 80 × 23 mm, special design. The codes in the number are read against the FV catalogue.

  • Series illustration (not a photo of this item): 32208 A32208 AThis bearingFV40 × 80 × 23available to orderon requestyou are here
  • Photo: 32208 A32208 AZ&S40 × 80 × 23available to order€4.86Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 40 × 80 × 24.75mm

Tapered roller bearing 32208. Under GOST the same bearing is designated 7508.

Frequently asked questions

What is 7508?

It is the same bearing under GOST 3189-89: 7508 corresponds to the ISO base 32208. Size 40 × 80 × 24.75 mm, a full equivalent of 32208.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet