+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6003: ⌀17 × ⌀35 × 10 mm6003
Fig. 1: 6003, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6003

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FLT 6003

€0.58per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
3 exact, 46 approximate
d
17 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
10 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.039 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 17 × 35 × 10 from other brands

49 products
Photo: 6003
You are viewingFLT 6003
€0.58baseline for the price comparison

Everything the number specifies matches: series 60, 17 × 35 × 10 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FLT catalogue.

  • Photo: 60036003This bearingFLT17 × 35 × 10available to order€0.58you are here
  • Series illustration (not a photo of this item): 60036003CT17 × 35 × 101,550 pcs€0.27−€0.31Request a quote
  • Series illustration (not a photo of this item): 60036003NTE17 × 35 × 10available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€0.58).
02

Details

what this bearing is, questions

About the bearing

D 35d 17B 10
d×D×Bsize 17 × 35 × 10mm
mweight 0.039kg

Deep groove ball bearing 6003. Under GOST the same bearing is designated 103.

M: FLT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 103?

It is the same bearing under GOST 3189-89: 103 corresponds to the ISO base 6003. Size 17 × 35 × 10 mm, a full equivalent of 6003.

Will 6003 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet