+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 51226 M: ⌀130 × ⌀190 × 45 mm⌀190⌀1304551226 M
Fig. 1: 51226 M, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 51226 M

Load: no radial load; axial medium, on one sideThrust ball

Bearing FLT 51226 M

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 2 approximate
d
130 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
190 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
H
45 mm
Height HMounting height: the distance between the seating faces of the washers of an assembled thrust bearing (ISO 104). Source: supplier data
01

Equivalents

the same size 130 × 190 × 45 from other brands

6 products
Cross-section drawing to size: Thrust ball, 130 × 190 × 45 mm
You are viewingFLT 51226 M

Everything the number specifies matches: series 512, 130 × 190 × 45 mm, special design. The codes in the number are read against the FLT catalogue.

  • Cross-section drawing to size: Thrust ball, 130 × 190 × 45 mm51226 MThis bearingFLT130 × 190 × 45available to orderon requestyou are here
  • Cross-section drawing to size: Thrust ball, 130 × 190 × 45 mm51226 MCT130 × 190 × 45available to orderon requestRequest a quote
  • Cross-section drawing to size: Thrust ball, 130 × 190 × 45 mm51226 MNTE130 × 190 × 45available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Hsize 130 × 190 × 45mm

Thrust ball bearing 51226. Under GOST the same bearing is designated 8226.

Frequently asked questions

What is 8226?

It is the same bearing under GOST 3189-89: 8226 corresponds to the ISO base 51226. Size 130 × 190 × 45 mm, a full equivalent of 51226.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet